Welcome to EcoFlow Support

Welcome to EcoFlow Support

We're here for you

FAQ

Why can't the robotic lawn mower be charged?

1. The charging pads of the robotic lawn mower are not in full contact with those of the charging station. Solution: Manually detach the robotic lawn mower from the charging station, and then put it back. 2. Check whether the charging pads are dirty, and the dirt will lead to charging failure. Solution: Clean the dirt with soft cloth. If it cannot be cleaned with the soft cloth, try to polish it with fine sandpaper. 3. If the problem still exists, please contact the after-sales service.

How is the cutting height defined?

The cutting height refers to the height from the blade disc to the tire. The actual height of cut grass will be larger than the set value as the grass is soft.

What should I do if the rain sensor is oxidized? Will its function be affected?

The rain detection will be triggered by mistake if the sensor is oxidized. If the rain sensor is found oxidized, clean the oxidized part with a small brush. Please ensure that there are no foreign substances on the rain sensor before use. If this function is not required, disable it in the app.

How to distinguish the front and rear of a robotic lawn mower?

The side in contact with the charging pads of the charging station is the front, and the side with the rear wheel handle is the rear.

What does the rain-caused work delay mean? What's its role?

The rain-caused work delay refers to the function that the robotic lawn mower automatically returns to the charging station due to the rain. When it is detected that the rain has stopped, the mower will not resume the mowing task immediately, but begin the countdown as per the delay time set in advance, and start mowing after the countdown is over. This can protect the lawn by avoiding the mowing operation of robotic lawn mower when the lawn is damp.

Contact us